| 01V96i | ||
|---|---|---|
| Mixing capability | Mixing channels | 32 Mono + 4 Stereo |
| GROUP | 8 | |
| AUX | 8 | |
| MAIN | Stereo | |
| Input channel functions | Gate Attenuator 4-band PEQ 2x Compressor Delay Pan | |
| Output channel functions | Attenuator 4-band PEQ Compressor Delay | |
| On-board processors | 4x SPX multi effectors | |
| I/O | Mic inputs | 12 |
| Phantom power | +48V DC; ON/OFF per 4ch | |
| Line inputs | 2x Stereo 2x 2tr in | |
| AD converter | 24-bit; 128-time over sampling | |
| Line outputs | Stereo output Monitor output 4x Omni output | |
| DA converter | 24-bit; 128-time over sampling | |
| Digital I/O | ADAT (8-in/8-out) 2tr in/out | |
| Expansion slots | Mini-YGDAI (16-in/16-out) | |
| Control and others | To Host(USB) MIDI Word clock I/O | |
| General specifications | 01V96i | |
| Internal processing | 32bit Accumulator: 58bit | |
| Sampling frequency rate | Internal | 44.1 kHz 48 kHz 88.2 kHz 96 kHz |
| External | 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) | |
| Signal delay | Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz) | |
| Total harmonic distortion | CH INPUT to STEREO OUT: Less than 0.05% 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01% 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05% 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01% 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz) | |
| Frequency response | CH INPUT to STEREO OUT: 0.5 -1.5dB 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5 -1.5dB 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz) | |
| Dynamic range | 110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz | |
| Hum & noise level | Equivalent input noise | -128dBu Equivalent Input Noise. |
| Residual output noise | -86dBu residual output noise. STEREO OUT: STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT: STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT: STEREO fader at nominal level and one CH INPUT fader at nominal level | |
| Crosstalk | -80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output | |
| Power requirements | AC100V 120V 220-240V 50/60 Hz | |
| Power consumption | 90W | |
| Dimensions | W | 436mm; 17-1/8in |
| H | 148mm; 5-7/8in | |
| D | 548mm; 21-5/8in | |
| Net weight | 14kg; 30.86lbs | |
