防爆温度计TP-9 The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves.
防爆温度计 的详细介绍
防爆温度计
防爆温度计TP-9
The TP9 employs the proven RTD design that has been used in the TP7 and TP8 for
many years. A sealed industrial quality overlay provides a user interface that is easy
to use with gloves. A stainless steel enclosure protects the circuit board and large LCD
from penetration by impact, water and reactive liquids.
The new TP9 circuit board is an evolutionary step up from our highly accurate, reliable
and successful TL1 laboratory thermometer. The Power Button’s primary function powers
the instrument for intervals of about 20 minutes since the last button was accessed. The
Power Button can also be used to conserve power and clear the memory, or to make
adjustment while in calibration mode. A simple menu operation is displayed by holding the
Function Button, and alternately functions to allow adjustments in the calibration mode.
Arrows on the left side of the display show the direction of the temperature reading and
whether stability has been reached. At the user’s discretion stabilized temperatures can
be logged at numerous liquid levels for a running average and later displayed for the user’s
documenting purposes. But this feature never interferes with simply getting an accurate
temperature reading.
To endure the environment and be intrinsically safe, the TP 9 is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of stainless steel. The probe assembly is constructed using non-stick cable and stainless steel sensor components.
防爆温度计TP-9技术参数：
Maximum Dimensions:
10”L x 4.25”H x 6.4” W
Probe
304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA
Cable Jacket, Coaxial Construction
Enclosure Material:
Stainless Steel
Acetal (Delrin) Probe Holder
Polyvinylchloride Faceplate
Stainless Steel Fasteners
Batteries:
2 AA Alkaline; Battery Life of approximately 200 hours
Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is extremely low or high.
Temperature:
Resolution 0.01
Range: -40 to +400°F
-40 to +204°C
Calibrated Accuracy:
±0.2°F from 32 to 200°F
±0.5°F from 200 to 400°F
±0.1°C from 0 to 100°C
±0.3°C from 100 to 200°C
4 Point NIST Traceable Report of Test
Long-term drift not to exceed 0.05%/year
Meets API requirements
产品规格：
最大尺寸：
10"长x 4.25"高x 6.4" W
Probe探测器
304不锈钢，密封胶，芳纶纤维增强，FEP或PFA
电缆护套，同轴建设
Enclosure Material:外壳材质：
Stainless Steel不锈钢
Acetal (Delrin) Probe Holder聚甲醛（聚甲醛）探头支架
Polyvinylchloride Faceplate聚氯乙烯面板
Stainless Steel Fasteners不锈钢紧固件
Batteries:电池：
2节AA碱性电池寿命约200小时
电池制造商的电池工作temperatature范围-4至130°F，-20?54°C
注：电池可能无法提供充足的电力，如果环境温度极低或极高。
Temperature:温度：
分辩率：0.01
范围：-40?+400°F，-40 to +204°C
精确度：
±0.2°F从32到200°F。
±0.5°F从200到400°F。
±0.3°C从100到200°C
4点NIST可追踪测试报告
长期漂移不超过0.05％/年
符合API要求
操作属性：
◆易于更换的AA电池，提供的估计200小时运行。
◆逻辑电路会自动显示电池电量不足时，自动关机二十分钟后，显示温度趋势和稳定，故障确定显示的错误代码。
◆低功耗背光，方便夜间操作是为了方便和节约电池的光电传感器控制。
◆在夜间条件下的背光照明显示。
◆摄氏或华氏单位C/F的指示可以很容易地从功能按钮选择。
◆用户手册介绍了直观的校准程序，可以通过外部的面板按钮。
典型应用：
托管转让，库存，储罐，管道，游艇，船舶，轨道车，油罐车（推荐操作：API7，国际油轮和油码头安全指南）。
其他应用：
检验系统（API 4）
Materials:材料：
所有石化产品，腐蚀性，耐酸，碱，粉末。糖蜜，糖浆，蒸馏酒。
